LIFA PRODUCT SPOTLIGHT
 |
"NEW" duct cleaning driller shaft / cable to Lifa range of products
Clients wanted cheaper and more rigid driller shafts for using them in small
rectangular and vertical ducts: we listened and brought back to production
single wire metal cable driller shafts. Still remembering the reasons abandoning
them in past, there is only strongest option with 3,8 mm (0,15") cable in 3 lengths:
3 meters (10ft), 5 meters (17ft) and 10 meters (33ft).
Click here and ask for a special offer europe@lifa.net
More information of differences between different types of driller shafts
|
 |
Secure solutions for better indoor air quality
In recent years more emphasis has been placed on both the quality and the safety of indoor air.
Since people spend 70 – 90 % of their time indoors, clean air is clearly important for health
and well-being. read more »
High Security Air Filters - www.3gfilters.com »
|
 |
|
|
|
Lifa Grease Cleaning Concept for restaurant kitchen and industrial exhaust air ducts further developed.
The new dry removal method is suitable for all types of grease, soft or hard-burned. This is due to the
unique capability of one cleaning machine capable of doing brushing, spraying chemicals and/or air-jetting
all at the same time. Also the fact that Lifa machines are the only ones powerful and durable enough to be
able to rotate a brush in a grease duct is a decisive factor.
The new "Grease Chopper" metal brush was developed to cut off that deep and layered grease
(which shouldn’t be there at all) accumulated over the years of no maintenance.
Initial investment cost is low, and also operating cost is very low. All heavy-greasy dirt is collected into
a special pre-separator unit with a plastic sack (easily disposed), and multiple options for air filtration
enables best possible but cost efficient air filter use and no unpleasant odours spread indoors. Other benefits
are that there are no leaks or drops from joints after cleaning.
With the different equipment in this set of equipment you can do normal air duct cleaning up to 1,2 m
ducts in size but also air-jetting or coating of insulated air ducts, disinfections or even graffiti removal jobs.
Multipurpose machines can be used for other types of industrial pipe cleaning also.
More information:
Kimmmo Haapalainen
Tel +358 9 394858 fax +358 9 3948 5781
E-mail: kimmo.haapalainen@lifa.net
|
|
 |
|
NEWS & EVENTS
06/2008 AirSecure open seminar 10.6.2008 in Belgium Brussel.
read more »
02/2008 Protecting our airports
Lifa Air has coordinated a pan-European project that has resulted in
a new detection and filtration system for protecting airports against
airborne chemical, biological and radiological.
read more »
12/2007 Progalva starts as a new Lifa representative for France.
Progalva is one of the leading whole sale suppliers in France for the
specialist maintenance equipment in water hygiene and fire and flood damage
restoration industry. By joining forces and know-how Progalva moves more in
depth into the field of air hygiene and ventilation cleaning, and Lifa Air
receives the know-how in respect to water hygiene. More detailed information
from
www.progalva.com and the
attached pdf.
10.-11.10. 2007 Deutsche Innenraumhygiene Bochum,
Stand 35 / HS Projektmanagement. Lifa Air has most equipment on
site for seeing and testing. In case you are interested to
get an invitation, please contact Mr. Kimmo Haapalainen.
E-mail: kimmo.haapalainen@lifa.net
read more »
UPCOMING EXHIBITIONS
Finnbuild, Helsinki Finland, Messukeskus Hall 2 / place b38
24.-27.9. 2008
AIISA-NADCA Annual Meeting, Rome Italy
22.-25.10. 2008
NADCA 20th Annual Meeting & Exposition, Orlando Florida, USA
9.-12.3. 2009
read more »
|
